The Ceramaker industrial 3D printer has become another novelty from the world-renowned manufacturer of 3D printing devices, 3DCERAM. A feature of the device is the use of additive technology to make models of ceramics. The model gained wide popularity in the aircraft industry, chemical industry, medicine, watchmaking and jewelry, devices are used to produce complex electrical components.
Technological features of printing
Three-dimensional printing is based on the layer-by-layer hardening by UV laser of a special paste, which is a mixture of photopolymer and ceramic powder. When the construction is completed, residues of material that have not polymerized will be removed from the surface of the product. After this, the product is washed in a special solvent.
When the construction of the product is completed, the stage of burning out the photopolymer, which acted as a temporary binder, will begin. Burn-out temperature: approximately + 600 ° C. After removing the polymer, the product is re-sent to the furnace, where the ceramics are sintered at a temperature of about + 1700 ° C.
Ceramaker 3D-printer allows to produce products with high surface quality, the roughness of which does not exceed 2 microns. Machining can be carried out at any intermediate stage.
The parameter setting module has an open architecture, so you can use different materials, including those made in Russia. The Ceramaker 3D printer is equipped with modules of various sizes. This provides an opportunity to optimize the paste consumption during printing.
Industrial 3D printers will become indispensable assistants in various industries. They reduce the time it takes for new products to enter the market, quickly make prototypes and evaluate them, as well as establish small and serial production.
Ceramaker installation uses stereolithographic technology for layer-by-layer curing of ceramic paste and is intended for pilot and batch production of ceramic products of complex and super-complex geometry.
Where to order supplies?
SIU System recommends ordering supplies from official 3DCERAM partners. At the moment, in Russia and the CIS countries we are the only official supplier.
Who can service the printer?
Specialists and companies with a special certificate from 3DCERAM. Currently, only SIU System has this status and official service center in Russia and the CIS countries.
What can be considered a warranty case?
A warranty case is a failure or critical abnormalities in the operation of both the equipment as a whole and any of its spare parts, provided that the client fully complies with the operating rules of the equipment indicated in the user manual, as well as the absence of other external circumstances and factors directly or indirectly causing a malfunction or deviation.
The lack of a built model on the build platform during or after the completion of the printer build process.
A voltage surge in the power supply network, which entailed the failure of other components and spare parts.