Leading 3D solutions integrator in Russia and CIS: wide range of equipment, software and services such as printing, consulting, engineering

Photopolymer resin Additive Plus Flex, black (1 l, 500 ml)

Price on request

  • Service maintenance

Photopolymer Flex is designed for printing on 3D printers using LCD technology. This is a truly innovative product that has no analogues on the market. Flexible resin with good strength properties.

For a long time it was believed that it was impossible to create a photopolymer that would combine high resistance to temperature changes, be flexible and have high impact strength. However, Additive Plus specialists managed to overcome the difficulties. The resin can withstand temperature drops from -40 ° C to +240 ° C. At the same time, the material has successfully passed the vibration test without destruction. For a short time, the material can be heated up to 340 degrees without loss of mechanical properties and appearance. What does this mean for users? You can print a form on a printer and fill it with tin (tin melting temperature 231 ° C). You can even substitute lead for tin.

 

Printing recommendations:

Photopolymer name

Flex

Layer height

100 microns

50 microns

25 microns

Exposure time of the first layers

from 50 to 70

from 50 to 70

from 40 to 70

Exposure time of subsequent layers

from 16

from 14

from 12

Number of first layers

3

3

3

A comment

When printing on supports:

1) don't place them too close to the model.

2) support with a diameter of 0.5 mm, cone contact shape.

When printing from the table, lay the model error along "z" 0.5 mm

 

Specifications:

Smell absent
Dynamic viscosity 23 ° С 667 mPa * s
Kinematic viscosity 585 sSt
UV curing wavelength up to 410 nm
Shore hardness 43 scale D
Deformation temperature 240 ° C
Charpy notch impact strength (kJ / m2) not destroyed
Charpy notched impact strength 17 kJ / m2
Breaking strength 13 MPa
Elongation at break 212%
Flexural modulus (MPa) does not collapse
Bending stress (MPa) does not collapse
Bending deformation (%) does not collapse
Shrinkage 0.9%

Volume: 1000 ml, 500 ml

 

 

Country: Russia

Purchase a printer to work with such materials

Purchase a printer to work with such materials

Properties

State Russia
Purpose Professional
Manufacturer Additive Plus

Make a request

We will surely contact you

First name Last name *

Phone number *

Please type in the symbols shown in the image above *

Fields marked with * are required

(0)