Leading 3D solutions integrator in Russia and CIS: wide range of equipment, software and services such as printing, consulting, engineering

Photopolymer resin Additive Plus Model FL, black (1 kg, 500 ml)

Price on request

  • Service maintenance

The photopolymer is suitable for creating high-quality models on SLA 3D printers. In particular, the materials have been successfully tested on Formlabs printers in Open Mode configuration.


  • High strength and elasticity;
  • Wide application in the production of accessories;
  • Odorless liquid and sediment;
  • The polymer is stable when stored properly;
  • Expiration date - 12 months.


Smell Absent
Density at 20 ° С 1090-1150 kg / m3
Dynamic viscosity (mPa * s) 512 23 ° C
Kinematic viscosity 290 sSt
UV curing wavelength up to 410 nm
Shore hardness 72 scale D
Charpy impact strength without notch 9 kJ / m2
Charpy notched impact strength 2 kJ / m2
Breaking strength 33 MPa
Elongation at break nine%
Flexural modulus 448 MPa
Bending stress 18 MPa
Bending deformation nine%
Shrinkage 0.7%

Country: Russia

Available volume: 1 kg, 500 ml. 


State Russia
Purpose Industrial
Manufacturer Additive Plus

Make a request

We will surely contact you

First name Last name *

Phone number *

Please type in the symbols shown in the image above *

Fields marked with * are required